- Sales & Parts Inquiries
SINCE 1973
SINCE 1973
FyreBx — Dust Suppression & Equipment Washing
The LandBx mounts to any skid steer and delivers 5 to 250 GPM of precision water suppression directly at the crusher face. OSHA 1926.1153 silica dust control. End-of-shift equipment washing. No water truck required. T3, T4, and T5 models.
Ships same or next day
Not a call center
Included with every machine
Insured, on-call
Concrete fines, mortar residue, and limestone dust bond to jaw plates, screen media, and conveyor rollers when left overnight. The LandBx delivers high-volume wash water to clear buildup before it sets — extending wear part life between replacements.
| Tank Capacity (T3) | 300 gallons (1,135 L) |
| Tank Capacity (T4) | 405 gallons (1,535 L) |
| Tank Capacity (T5) | 500 gallons (1,892 L) |
| Pump Type | Submerged hydraulic water pump — powered by host machine hydraulics |
| Flow Rate | 5–250 GPM (varies with hydraulic flow and nozzle selection) |
| Output Pressure | 115 PSI at 70 GPM (with 250 ft of 1.5" hose and 5/8" tapered tip) |
| Agitation | Recirculating agitation system for seed/mulch slurry applications |
| T3 Dimensions | 83" W x 41" H x 61" D |
| T3 Weight (empty) | ~850 lbs |
| T3 Weight (full) | ~3,300–3,500 lbs (without/with blade) |
| T5 Host Requirement | 11,500 lbs (5,216 kg) or heavier recommended |
| Compatibility | Any skid steer or CTL with standard quick-attach |
| Fluid Types | Water, hydro-mulch, foam, dust suppression solutions, erosion tackifiers |
| Available Add-Ons | Dozer blade, hose reel, winch, auxiliary pump |
| Origin | Made in the USA (Anderson/Redding, California) |
Wear parts and components stocked in Smyrna, GA. Ships same or next day.
When you call, you reach someone who knows the machine. Not a ticketing system. A person on the phone.
We come to your yard. We run the machine with your crew. We don't leave until it's running right.
A network of insured field technicians across the US. If the problem can't be solved over the phone, we put someone on it.
Since 1973 — 50+ years of knowing exactly what breaks and exactly how to fix it.
Brand Hub
FyreBx — Fire Suppression
FuelBx — On-Site Diesel
Related Equipment
The jaw crusher the LandBx is most often paired with on commercial demolition and recycling sites.
Related Application
OSHA 29 CFR 1926.1153 requires dust controls for silica-generating operations at construction sites. Water suppression at the point of dust generation is an accepted engineering control under this standard. The LandBx delivers precision water suppression directly at the crusher jaw discharge — the primary dust generation point. Whether a specific LandBx configuration satisfies 1926.1153 for your operation depends on flow rate, application method, and air monitoring results. Consult a qualified industrial hygienist to verify compliance for your specific setup.
The T3, T4, and T5 designations refer to tank capacity: the T3 holds 300 gallons, the T4 holds 405 gallons, and the T5 holds 500 gallons. All three models use the same submerged hydraulic pump system and accept the same add-ons. The T5 is recommended for host machines weighing 11,500 lbs or more due to the added weight of a full 500-gallon tank. The T3 at 300 gallons is the most common choice for job-site crusher operations where the skid steer is mid-frame or smaller.
The LandBx T3 weighs approximately 850 lbs empty and approximately 3,300 to 3,500 lbs when full, depending on whether a dozer blade is attached. Most mid-frame skid steers and CTLs with a rated operating capacity of 2,000 lbs or more handle the T3 when partially filled. For a full 300-gallon load, a large-frame skid steer or CTL is recommended. Contact us with your host machine model and we will confirm compatibility before you configure.
The LandBx and FuelBx are both quick-attach skid steer attachments, so they share the same carrier machine on a job site. They cannot be mounted simultaneously, but the same skid steer can switch between them using the quick-attach plate. On a circuit where both dust suppression and on-site fueling are needed, a single skid steer operates both attachments at different times during the shift.
The LandBx is designed for water, hydro-mulch, erosion control tackifiers, foam, and water-soluble dust suppression solutions. It includes recirculating agitation for slurry applications. Do not use the LandBx for diesel fuel, chemicals incompatible with the tank material, or fluids outside the manufacturer’s approved use parameters. For specific fluid compatibility questions, contact FyreBx directly at info@fyrebx.com.